IBC cleaning systems consist of a cleaning unit, which is moved vertically by means of a linear drive, is attached to a vertical column with a cantilever arm. The cleaning unit consists of two 360° rotating arms on which the cleaning nozzles are attached. The cleaning unit is inserted into the container. The unit is rotated during the cleaning cycle by a pneumatic rotary drive. This enables it to reach all corners on the inside of the container and to clean them with compressed air or hot water. The nozzles have a central supply of cleaning air that runs in a flexible energy supply chain.
The IBC container equipped with an outlet valve is placed in the cleaning station. Centring corners make it easier to position the container. The patented docking collar creates a dust-tight connection between the container outlet and the suction hopper. An aspiration line from a central filter station is connected to the suction hopper. The product residue that are removed during the cleaning process are drawn off and disposed of in a central dust extraction system.
The IBC cleaning system is placed in the cleaning station. The linear drive with the attached cleaning unit is in the upper end position and the rotary drive is in the starting position. The cleaning air supply and extractor are switched off. The container can be positioned manually using a fork-lift truck or moved into the station using a roller or chain conveyor. It is possible to implement various levels of automation. The container outlet is connected to the docking collar on the suction hopper either by lowering the container or by raising the suction hopper, depending on the design.
Various levels of automation are also available for opening the container cover. Once the container outlet valve is open, the IBC cleaning unit is moved into the container to the lower end position. The following sequences run automatically in accordance with the specified parameters. Once the cleaning unit has been inserted into the container, the arms with the cleaning nozzles unfold and the aspiration is switched on. When planning the system, it is important to ensure that the air volume for aspiration is greater than the volume of compressed air for cleaning.
The slight negative pressure in the container helps to reliably prevent dust from escaping.
A rotary drives rotates the cleaning unit when the cleaning air is turned on. Product residue adhered to the container are blown off from the walls and sucked downwards into the central filter. The length of the cleaning cycle can be varied depending on the level of soiling.
At the end of the cleaning operation, the air supply to the cleaning nozzles is shut off and the arms are folded together.
The cleaning unit can now be moved out of the container and aspiration stopped. The machine operator closes the container outlet valve and locks the container cover in place to then move the container out of the station. The clean container can now be immediately returned back to production.
IBC container cleaning systems or drum cleaning systems are precisely aligned to the individual demands of the product and our customers. Intelligent mechanical engineering with high-quality process engineering and the associated instrumentation and control technology are entirely planned and constructed internally in our own specialist departments. GMP Design and FDA requirements are fully integrated.
IBC container cleaning systems also suitable for barrels / drums are can be loaded by forklift or palett truck. Automatic Loading by roller conveyer is an available option.
Technical design of the system:
Material: completely of stainless steel AISI 304
Dimensions: (LxWxH): 1350 x 1350 x 12370 mm
compressed air: 6 bar, 1500 l/min (option for dry cleaning)
Washing pump: Transport capacity: approx. 15 l/min
Op. pressure: approx. 150 bar
Drive: Electric motor 230/400V, 50 Hz
el. Power: 4 kW
Cleaning lid: stainless steel 1.4404, bushes PTFE
Working pressure: up to 250 bar
certificate: CE conformity
PLC Functions
- automatic transport of IBC into cleaning position
- docking cleaning head onto manhole and outlet valve
- start cleaning process (recipe management)
(set up of cleaning time) - individual versions upon request
fully automatic ibc cleaning system with compressed air
pic.: high pressure drum wet cleaning station for drums